Item Description
Remove road grime and brake dust “naturally”!
Montana Original Boar’s Hair 20-inch Wheel Brush is packed with real boar’s hair bristles. We chose slightly stiffer hairs from a more mature animal than what you’ll find in our boar’s hair wash brushes. The increased firmness makes the bristles more effective at removing the tough grime that coats wheels, like stubborn brake dust. The hairs are thoroughly cleaned before being attached to the handles.
With hundreds of sturdy yet flexible hairs, our Montana Original Boar’s Hair 20 inch Wheel Brush is the safest brush you can use on coated, painted, plated, or anodized wheel finishes. Each hair is naturally feathered at the end to ensure a gentle touch on the wheels.
The long handle allows you to keep your hands clean and dry while you clean your wheels, bumpers, and grill. The long handle also enables you to clean deep in the wheel wells, where mud and grime are splashed as you drive.
The wheel brush features a convenient hanging hole in the end of the handle. Bristles are bundled and permanently glued into the molded plastic handles. The plastic construction ensures long term performance.
For the best results, use a water-based wheel cleaner such as DP Dual Action Tire & Wheel Cleaner, no matter what kind of wheels you have. This non-acidic, non-corrosive cleaner breaks the bond between brake dust and the wheel surface. Gentle agitation with the Montana Original Boar’s Hair 20 inch Wheel Brush will leave your wheels sparkling clean.
Be gentle on your wheels because the road is not. The Montana Original Boar’s Hair 20-inch Wheel Brush safely and effectively cleans all types of wheels with the 100% natural boar’s hair.
It's recommended you soak your boar's hair wash brush in soapy water for a few minutes before use to make the hairs softer and more pliable.
Rinse Immediately After Use
1. Use clean warm water (optional: Add a dedicated gentle cleaner like Wolfgang Microfiber Cleaner and Rejuvenator)
2. Swirl the brush in the water and gently massage the bristles to release grime and chemical residues.
3. Rinse until the water runs clear.
4. Shake off excess water by flicking the brush downward
5. Best drying method is to hang the brushes with bristles facing down using a brush holder or a DIY setup with clips.
| SKU(s) | MB-1120 |
| Applicable Finishes | Coated, painted, plated, or anodized wheel finishes |
20-inch handle.
2.5-inch bristles.
Made in U.S.A.
